Displaying The Logging Configuration - Cisco Catalyst 3550 series Software Configuration Manual

Displaying the Logging Configuration

Command
Step 4 logging facility facility-type
Step 5
end
Step 6
show running-config
Step 7 copy running-config startup-config
To remove a syslog server, use the no logging host global configuration command, and specify the syslog
server IP address. To disable logging to syslog servers, enter the no logging trap global configuration
command.
Table 26-4
about these facilities, consult the operator's manual for your UNIX operating system.
Table 26-4 Logging Facility-Type Keywords
Facility Type Keyword
auth
cron
daemon
kern
local0-7
lpr
mail
news
sys9
sys10
sys11
sys12
sys13
sys14
syslog
user
uucp
Displaying the Logging Configuration
To display the logging configuration and the contents of the log buffer, use the show logging privileged
EXEC command. For information about the fields in this display, refer to the Cisco IOS Configuration
Fundamentals Command Reference for Cisco IOS Release 12.1.
Catalyst 3550 Multilayer Switch Software Configuration Guide
26-12
Purpose
Configure the syslog facility. See
facility-type keywords.
The default is local7.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
lists the UNIX system facilities supported by the Cisco IOS software. For more information
Description
Authorization system
Cron facility
System daemon
Kernel
Locally defined messages
Line printer system
Mail system
USENET news
System use
System use
System use
System use
System use
System use
System log
User process
UNIX-to-UNIX copy system
Chapter 26 Configuring System Message Logging
Table 26-4 on page 26-12 for
78-11194-09