Displaying Mvr Information - Cisco Catalyst 3550 series Software Configuration Manual

Displaying MVR Information

Displaying MVR Information
You can display MVR information for the switch or for a specified interface.
Beginning in privileged EXEC mode, use the commands in
Table 20-6 Commands for Displaying MVR Information
show mvr
show mvr interface [interface-id]
[members [vlan vlan-id]]
show mvr members [ip-address] Displays all receiver and source ports that are members of any IP multicast group or the
This is an example of output from the show mvr privileged EXEC command:
Switch# show mvr
MVR Running: TRUE
MVR multicast vlan: 1
MVR Max Multicast Groups: 256
MVR Current multicast groups: 256
MVR Global query response time: 5 (tenths of sec)
MVR Mode: compatible
This is an example of output from the show mvr interface privileged EXEC command:
Switch# show mvr interface
Port
----
Fa0/1
Fa0/2
Fa0/3
Fa0/5
This is an example of output from the show mvr interface privileged EXEC command for a specified
interface:
Switch# show mvr interface fastethernet0/2
224.0.1.1
Catalyst 3550 Multilayer Switch Software Configuration Guide
20-20
Displays MVR status and values for the switch—whether MVR is enabled or disabled,
the multicast VLAN, the maximum (256) and current (0 through 256) number of
multicast groups, the query response time, and the MVR mode.
Displays all MVR interfaces and their MVR configurations.
When a specific interface is entered, displays this information:
Type—Receiver or Source
•
Status—One of these:
•
Active means the port is part of a VLAN.
–
Up/Down means that the port is forwarding or nonforwarding.
–
– Inactive means that the port is not part of any VLAN.
• Immediate Leave—Enabled or Disabled
If the members keyword is entered, displays all multicast group members on this port or,
if a VLAN identification is entered, all multicast group members on the VLAN. The
VLAN ID range is 1 to 4094.
specified IP multicast group IP address.
Type Status
---- ------- ---------------
SOURCE ACTIVE/UP
SOURCE ACTIVE/UP
SOURCE ACTIVE/DOWN
SOURCE ACTIVE/DOWN
DYNAMIC ACTIVE
Chapter 20
Table 20-6 to display MVR configuration:
Immediate Leave
DISABLED
DISABLED
DISABLED
DISABLED
Configuring IGMP Snooping and MVR
78-11194-09