Powering On The Switch - HP FlexFabric 5700-48G-4XG-2QSFP+ TAA Installation Manual

Flexfabric 5700 series
Table of Contents

Advertisement

Powering on the switch

Before powering on the switch, verify that the following conditions are met:
The power cord is correctly connected.
The input power voltage meets the requirement of the switch.
The console cable is correctly connected.
The configuration terminal (a PC, for example) has started, and its serial port settings are consistent
with the console port settings on the switch.
Power on the switch. During the startup process, you can access Boot ROM menus to perform tasks such
as software upgrade and file management. The Boot ROM interface and menu options differ with
software versions. For more information about Boot ROM menu options, see the software-matching
release notes for the device.
After the startup completes, you can access the CLI to configure the switch.
For more information about the configuration commands and CLI, see HP FlexFabric 5700 Switch Series
Configuration Guides and HP FlexFabric 5700 Switch Series Command References.
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 5700-40xg-2qsfp+Flexfabric 5700-32xgt-8xg-2qsfp+ taaFlexfabric 5700-40xg-2qsfp+ taaFlexfabric 5700-32xgt-8xg-2qsfp+

Table of Contents