Installing The Switch - HP FlexFabric 5700-48G-4XG-2QSFP+ TAA Installation Manual

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence caused thereby.
Figure 1 Hardware installation flow
Installing the switch in a 19-inch rack
Installation prerequisites
To close the rack door easily, make sure the rack depth for the HP 5700-32XGT-8XG-2QSFP+ and HP
5700-32XGT-8XG-2QSFP+ TAA switches is a minimum of 1000 mm (39.37 in).
The distance from the front to the rear posts of the rack must meet the requirements described in
You must use both the mounting bracket and the rack mounting rail kit to rack-mount the switch.
7
Table 5.