Qsfp+ Port Led - HP FlexFabric 5700-48G-4XG-2QSFP+ TAA Installation Manual

LED status
Steady yellow
Flashing yellow
Off

QSFP+ port LED

Each QSFP+ port has a status LED to show port operating status and activities.
Table 20 QSFP+ port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
10/100/1000Base-T autosensing Ethernet port LEDs
Table 21 10/100/1000Base-T autosensing Ethernet port LED description
Status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
1/10GBase-T autosensing Ethernet port LEDs
Table 22 1/10GBase-T autosensing Ethernet port LED description
Status
Steady green
Flashing green
Steady yellow
Description
A transceiver module or cable has been correctly installed. A link is present, and the port
is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Description
A transceiver module or cable has been correctly installed. A link is present, and
the port is operating at 40 Gbps.
The port is sending or receiving data at 40 Gbps.
A transceiver module or cable has been correctly installed. A link is present, and
the port is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Description
A link is present, and the port is operating at 1000 Mbps.
The port is sending or receiving data at 1000 Mbps.
A link is present, and the port is operating at 10/100 Mbps.
The port is sending or receiving data at 10/100 Mbps.
No link is present.
Description
A link is present, and the port is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
A link is present, and the port is operating at 1 Gbps.
52