AEG 49176IW-MN User Manual page 20

20 www.aeg.com
3. Activate the appliance.
4. Press
main oven appears.
5. Set the core temperature:
a. Press
the function core temperature
sensor flashes and the display
shows the core temperature.
The default core
temperature is 60 °C.
b. Press
seconds to set the core
temperature.
The core temperature is displayed from
30 °C.
6. Set the oven function and, if
necessary, the oven temperature
.
While the appliance calculates the
approximate end time, the display
shows a square that flashes.
The appliance calculates the
approximate end time for the set core
temperature again and again. The
display constantly shows the new
approximate end time.
7. Press a button to stop the signal.
An acoustic signal sounds, when the
meat is at the set core temperature.
8. Remove the plug of the core
temperature sensor from the socket .
Remove the meat from the
appliance.
9. Deactivate the appliance.
again and again until the
again and again until
or in less than 5
WARNING!
Be careful when you remove
the tip and plug of the core
temperature sensor. The
core temperature sensor is
hot. There is a risk of burns.
8.14 Inserting the oven
accessories
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
/
• All accessories have small
indentations at the top of
the right and left side to
increase safety. The
indentations are also anti-
tip devices.
• The high rim around the
shelf is a device which
prevents cookware from
slipping.