Oven - Hints And Tips - AEG 49176IW-MN User Manual

22 www.aeg.com
The clock function operates. The display
shows the indicator for the clock function
you set.
To set the Time Delay
function, first set the
Duration
the End
When the time ends the indicator of the
clock function and "00.00" flash and an
acoustic signal sounds for 2 minutes. The
appliance deactivates.
Touch a sensor field to stop the acoustic
signal.
With the Duration
the End
deactivates automatically.
9.3 Activating Heat + Hold (if
applicable)
The temperature for the set
oven function must be
above 80°C.

10. OVEN - HINTS AND TIPS

WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
Always preheat an empty
oven at the temperature
required for the food for 20
minutes before you start
cooking.
10.1 Top oven
The top oven is the smaller of the two
ovens. It has 3 shelf positions. Use it to
cook smaller quantities of food. It gives
especially good results when used to
cook fruitcakes, sweets and savoury flants
or quiche.
and then set
.
and
, the oven
The Heat+Hold function keeps prepared
food warm for 30 minutes after the
cooking is completed.
1. Set the time with the clock functions
Duration and / or End
2. Press again and again until the
display shows the symbol Keep warm
.
3. Use and the display shows
"00:30".
When the function ends, an acoustic
signal sounds. The oven deactivates
automatically.
10.2 Main oven
The main oven is particularly suitable for
cooking larger quantities of food.
10.3 Baking
• Your oven may bake or roast
differently to the appliance you had
before. Adapt your usual settings
such as temperature, cooking time
and shelf position to the values in the
tables.
• Use the lower temperature the first
time.
• If you cannot find the settings for a
special recipe, look for the similar
one.
• You can extend baking times by 10 –
15 minutes if you bake cakes on more
than one shelf position.
• Cakes and pastries at different
heights do not always brown equally
at first. If this occurs, do not change
the temperature setting. The
.