Table of Contents
Advertisement
®
AmpFlex
- Flexible AC Current Probes
Description
®
The AmpFlex
is a flexible AC current transformer composed of a flexible
sensor and an electronic module. The flexible sensor permits
measurements on conductors where standard clamp-on probes could
not be used. In particular, it can be installed in tight spaces, around
breaker panels, around cable bundles, around wide or large bus bars, or
even wrapped around irregular shapes. The Shape Memory feature
enables the user to "pre-shape" the sensor before inserting it between or
around conductors. This feature facilitates closing, enhances user safety,
and alleviates the drooping effect typically associated with flexible
sensors.
®
The AmpFlex
is lightweight and does not use magnetic cores like
standard transformers. The transformation principle is based on an air
core. It presents virtually no load to the system under test, has a low
phase shift and excellent frequency response, and cannot be damaged
by overloads.
The sensor assembly is waterproof and insulated for 600V CAT IV;
®
1000V CAT III. The AmpFlex
meets EN 61010-1, is CE marked, and is
designed with materials and components to meet international agency
approvals.
®
The AmpFlex
has an mV output proportional to the current measured
for direct readings on DMMs, data loggers, oscilloscopes, and power or
harmonic meters. TRMS measurements are taken when connected to a
®
TRMS meter. The AmpFlex
is insensitive to DC currents and only the
AC component of the measured signal is measured.
The length of the flexible sensor can be selected in lengths of 24", 36",
and 48" in length. Consult the factory for custom lengths, ranges and/or
features.
- 4 -
ShopAEMC
www.
.ca
1.800.561.8187
Shop for AEMC products online at:
Advertisement
Table of Contents
