Omega MICROMEGA CN77000 series User Manual page 61

Output 2 cont.
Display Action
ACTN
Press ENTER
TYPE
Press MAX
Press ENTER
ACTN
DRCT
The error that results from the measurement of the process variable may be positive or negative since it may be greater or
Note
smaller than the set point. If a positive error should cause the controller output to increase (i.e. cooling), it would be called
Direct Acting. If a negative error should cause the output to increase (i.e. heating), it would be called Reverse Acting.
O
PERATION
Response
ACTION TYPE SUBMENU:
"
drCt
6) Display flashes
7) Scroll through the available selections: Direct or Reverse.
"
8) Display flashes strd
" "
If ON/OFF was selected in the Control Type, the display skips to the
submenu.
: C
ONFIGURATION
" " "
rUrs
or .
"
message and advances to
part
3
M
ODE
" "
Auto PID submenu.
"
Deadband
"
53