Omega MICROMEGA CN77000 series User Manual page 53

Output 1 cont.
Display Action
AUTO
Press ENTER
PID
Press MAX
AUTO
ENBL
Press ENTER
ADPT
Press ENTER
C
TRL
Press MAX
ADPT
ENBL
Press ENTER
O
PERATION
Response
AUTO PID SUBMENU:
"
enbl
19) Display flashes
20) Scroll through the available selections: Enable or Disable.
" "
If Enabled , the controller can determine, by enabling Start PID, the optimum values
for the three adjustments Ñ Proportional, Reset and Rate corresponding to P, I, and
D. These values may be changed once the auto tuning is complete. If
selected, the user will manually enter these three adjustment values. If you want the
controller to do the auto PID and the P, PI or PID, first select auto disable and enter
0000 for the unwanted parameter. e.g. for PI enter 0000 for the rate.
"
21) Display flashes stored
*ADAPTIVE CONTROL SUBMENU: * (NOT INSTALLED)
"
22) Display flashes enbl
23) Scroll through the available selections: Enable or Disable.
" "
If Enabled , the Adaptive Tuning dynamically changes and updates the P, I, and D
parameters for optimum control. The adaptive tuning is useful when the load
continuously changes thereby requiring new values for P, I, and D.
"
24) Display flashes stored
: C
ONFIGURATION
" " "
dsbl
or .
"
message and advances to
" " "
or dsbl .
"
message and advances to
part
3
M
ODE
"
Disabled
" "
Adaptive Control submenu.
" "
Anti Integral submenu.
"
is
45