Omega MICROMEGA CN77000 series User Manual page 30

part
3
O
PERATION
Set Points (if ID Number Disabled - default)
Display Action
Press MENU
125. 5
(1 time)
Press MAX
100. 5
Press MIN
Press ENTER
125. 5
Press MENU
(2 times)
210. 5
125. 5
Press MENU
(3 times)
S1. o . 1
Press MAX
Press ENTER
22
: C M
ONFIGURATION
Response
With ID number disabled and in Run Mode, pressing MENU one time advances the
controller to Setpoint 1 setting directly.
SET POINT 1
1) Press MENU once from Run Mode.
2) Display flashes the first digit of Setpoint 1.
3) Press MAX to set the digit, 0-9.
4) Press MIN to activate the next digit (flashing).
5) Repeat step 3 and 4 until all digits are set.
6) Controller stores new setting and returns to Run Mode.
SET POINT 2
1) Press MENU twice from Run Mode.
2) Display flashes the first digit of Setpoint 2.
3) Follow step 3 to 6 of Setpoint 1 to complete the setting.
OUTPUT REDIRECTION
1) Press MENU 3 times from Run Mode.
2) Display flashes ÒS1. o . 1 Ó in the SV window. (See previous page for more details.)
3) Press MAX to select the output option.
4) Press ENTER to make the selection or MENU to advance to ÒInput TypeÓ.
ODE