Energy Efficiency - Electrolux EOB9956XAX User Manual

Problem
There is too much water on
the bottom of the cavity af‐
ter the end of the cleaning
function.
There is no good perform‐
ance of the cleaning proce‐
dure.
There is no good perform‐
ance of the cleaning proce‐
dure.
There is no good perform‐
ance of the cleaning proce‐
dure.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. ENERGY EFFICIENCY

14.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Possible cause
You sprayed too much de‐
tergent in the appliance
before the activation of the
cleaning cycle.
The initial oven cavity tem‐
perature of the steam
cleaning function was too
high.
You did not remove the
side grids before the start
of the cleaning procedure.
They can transfer heat to
the walls and decrease the
performance.
You did not remove the ac‐
cessories from the appli‐
ance before the start of the
cleaning procedure. They
can compromise the steam
cycle and decrease the
performance.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
Cover all parts of the cavity
with a thin layer of the de‐
tergent. Spray the deter‐
gent evenly.
Repeat the cycle. Run the
cycle when the appliance
is cold.
Remove the side grids
from the appliance and re‐
peat the function.
Remove the accessories
from the appliance and re‐
peat the function.
Electrolux
EOB9956XAX
81.0
ENGLISH 61