Fargo DTC400 User Manual page 147

RESTRICTED USE ONLY
Changing the Log Name (continued)
Step Procedure
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2). See the previous page.
3 Enter a new log name in textbox.
4 Click on the Submit button to save this change.
5 Log in as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
Fargo Electronics, Inc.
5-32