Using The Required Supplies - Fargo DTC400 User Manual

RESTRICTED USE ONLY

Using the Required Supplies

For the maintenance procedures outlined for the Printer, you will need a Printer Cleaning Kit,
available from the reseller. This kit includes the following:

Printhead Cleaning Swabs pre-moistened with 99.99% isopropyl alcohol for cleaning the
Printer's Printhead.

Cleaning Cards with an adhesive backing for cleaning the Printer's Card Feed Rollers
and Platen Roller.

Cleaning Pads pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer's
general inside and outside area.
Caution: As with any electronic device, internal components of the Printer, such as
the Printhead, may be damaged if exposed to static electrical discharges.

To avoid potential damage, always wear an appropriate personal grounding device, such
as a wrist strap (with integral resistor) connected to an ESD ground.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
Fargo Electronics, Inc.
7-2