Profibus Pa - ABB FSM4000 Operating Instructions Manual

c) „Contrans I" Using FSK-Modem (Notebook/Desktop)
Fig. 18:
8.5
This section of the Operating Instruction contains information for the converter with the Communication
PROFIBUS PA option.
The converter is designed to be connected to a Segment Coupler DP/PA as well as the ABB Multibarrier
MB204.
The PROFIBUS PA data link in the FSM4000 conforms to Profile 3.0 (Fieldbus Standard PROFIBUS, EN
50170, alias DIN 19245[PRO91]). The transmission signal of the converter corresponds to the IEC 61158-2
requirements. The manufacturer specific PROFIBUS PA Ident-No. for the FSM4000 is: 078C hex.
The instrument can also be operated using PROFIBUS Standard Ident Numbers 9700 hex and 9740 hex.
44 S4
SMART
VISION
RS232
Contrans-I-Module Rack
Transmitter Power Supply
4..20 mA
Transmitter Power Supply
4..20 mA
Transmitter Power Supply
4..20 mA
Max. 1200 Instruments
Connections Using „Contrans I"

PROFIBUS PA

SMART VISION
FSK
HART-FSK-Modem
Galvanic isolation, Ex-Protection
[EEx ib] incl. connection cable
4/2 mm and 4/4 mm
or
HART-FSK-Modem
Clip on version,
Galvanic isolation with
alligator clips
Field Instrument
Module mount 8 unit
8 plug in locations for Contrans I-Modules.
Isolation protection of the supply power,
Address "0"
modules and signal circuit. Process up to
16 Ex- or Non-Ex signals
Field Instrument
or
Module Rack 16unit / 21 unit
Address "0"
16/21 plug in locations for Contrans I-
Modules. Isolation protection of the supply
power, modules and signal circuit. Process
up to 31/42 Ex- or Non-Ex signals,
Field Instrument
redundant
contact.
FSK-Bus-Coupler
Address "0"
for 16, 21, 32 channels
FSK-Bus design with Contrans I-Modules
in a module rack, bidirectional transmission
of the FSK signals per HART-Protocol,
economical,
communication
instruments using SMART VISION.
power supply with alarm
centralized operation,
with intelligent field
D184B122U02