Pulsed Mig - Wire And Gas Selection Table - Miller AlumaPower 450 MPa Owner's Manual

7-5. Pulsed MIG - Wire and Gas Selection Table

WIRE TYPES*
Aluminum
*Wire diameter in inches (mm). Refer to section 6-2 to change displayed units.
.
Other normal gas mixtures can be used by adjusting arc length and sharp arc. Use the program closest to your gas mixture and wire type and
size.
Notes
.
A complete Parts List is available at www.MillerWelds.com
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
.035 (0.9) AL49 (4943)
.040 (1.0) AL49 (4943)
3/64 (1.2) AL49 (4943)
1/16 (1.6) AL49 (4943)
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
GAS TYPES
ARGN (ARGON)
ARGN (ARGON)
HE AR25 (HELIUM/ARGON)
OM-257219 Page 31