Miller AlumaPower 450 MPa Owner's Manual page 17

Environmental Protection Use Period (China)
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
V
>5min
= < 60°
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Become trained and read the instructions before working on the
machine or welding.
V
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait 5 minutes after
power is turned off before working on unit, OR check input capacitor
voltage, and be sure it is near 0 before touching any parts.
V
Always lift and support unit using both handles. Keep angle of lifting
device less than 60 degrees.
Use a proper cart to move unit.
.
A complete Parts List is available at www.MillerWelds.com
Safe123 2016−06
Safe38 2012−05
Safe40 2012−05
Safe43 2012−05
Safe44 2012−05
OM-257219 Page 11