Wire Type Selection In Synergic Mig Or Synergic Pulsed Mig Welding; Wire Diameter Selection In Synergic Mig Or Synergic Pulsed Mig Welding - Miller XMS 403 Owner's Manual

4-6. Wire Type Selection in Synergic MIG or Synergic Pulsed MIG Welding

L5
L6
L7
L8
P4
L5 LED
L6 LED
L7 LED
L8 LED
P4 Push Button
Press P4 until desired material LED illumi-
nates. D1 and D2 will show material name
only momentarily, and then return to the
main display.
.
D1 and D2 will show NO PROG or a
selection will not be allowed when there

4-7. Wire Diameter Selection In Synergic MIG Or Synergic Pulsed MIG Welding

L9
L10
L11
L12
P5
L9 LED
L10 LED
L11 LED
L12 LED
P5 Push Button
Press P5 until desired wire diameter LED
illuminates.
OM-244 243 Page 20
is no program for the process, material,
wire diameter, and shielding gas com-
bination.
L5 selection is for carbon steel.
L6 selection is for stainless steel.
L7 selection is for aluminum.
L8 selection is for other wire types not pro-
vided by standard selection.
Pressing P2 push button after a selection is
made to allow choosing other wire types
within the main selection.
.
D1 and D2 will show NO PROG or a
selection will not be allowed when
there is no program for the process,
material, wire diameter, and shielding
gas combination.
L9 selection is for 0.8 mm diameter wire.
L10 selection is for 1.0 mm diameter wire.
Ref. 956142645-5-5
SG2/3 allows selecting SG2 or SG3.
CrNi allows selecting 308L, 309L, or 316L.
Al allows selecting AlMg (AlMg5) or AlSi
(AlSi5).
Special permits selection of cored wire or
special wire types. (Abbreviations for the
different wire types appear in displays D1
and D2).
.
Wire type selection is retained in the
welding process memory until a new
selection is made.
Ref. 956142645-5-5
L11 selection is for 1.2 mm diameter wire.
L12 selection is for other wire diameters not
provided by standard selection.
Pressing P2 push button after the special
selection is made to allow choosing other
wire diameters not available by standard
selection.