Miller AlumaPower 450 MPa Owner's Manual page 16

.
A complete Parts List is available at www.MillerWelds.com
Do not weld on drums or any closed containers.
Do not remove or paint over (cover) the label.
Disconnect input plug or power before working on machine.
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Always wear long sleeves and button your collar when servicing unit.
After taking proper precautions as shown, connect power to unit.
Do not use one handle to lift or support unit.
V
?
A
?
Consult rating label for input power requirements.
Become trained and read the instructions before working on machine.
Connect Green Or Green/Yellow grounding conductor to ground terminal first.
Connect input conductors (L1, L2, L3) to line terminals.
OM-257219 Page 10
Safe16 2012−05
Safe20 2012−05
Safe30 2012−05
Safe27 2012−05
Safe28 2012−05
Safe29 2012−05
Safe31 2012−05
Safe34 2012−05
Safe35 2012−05
Safe36 2012−05