Sun Oracle Netra 6000 Getting Started Manual page 5

2. Verify the chassis initialization by viewing the front or rear status LEDs.
Green OK LED – Illuminates a solid green light, indicating successful initialization.
■
Amber fault LED – Illuminates if a fault is detected. If the amber fault LED is illuminated, check for other
■
fault indicators on modular components, unplug the chassis, and take corrective actions.
Assigning an IP Address to the CMM NET MGT Port
If you plan to use the CMM NET MGT port to access ILOM, the CMM must have an IP address.
This guide instructs you to assign a static IP address to the CMM port. Alternatively, you can use DHCP services
to assign an IP address to the CMM NET MGT port. For details, refer to the Sun Netra 6000 Modular System
Installation Guide.
▼ Assign a Static IP Address to the CMM
Follow these instructions when assigning a static IP address to the CMM through the SER MGT port.
Note – If you assign a static IP address to the CMM, the CMM will no longer automatically attempt to use
DHCP services.
1. Log into Oracle ILOM using the default user name root and password changeme.
The Oracle ILOM prompt appears (->), and the CMM is ready to accept Oracle ILOM CLI commands.
For more details on running ILOM commands, refer to the ILOM documentation.
2. Access the CMM network directory:
-> cd /CMM/network/
3. Type the following commands to specify the IP, netmask, and gateway addresses for the CMM ILOM.
-> set pendingipaddress=static_IP_address
-> set pendingipnetmask=static_netmask_address
-> set pendingipgateway=ip_gateway_address
-> set pendingipdiscovery=static
-> set commitpending=true
4. Type the show command to verify that the CMM accepted the values you set.
▼ Log Into Oracle ILOM Through the CMM NET MGT Port
Once you know the CMM IP address, you can log into Oracle ILOM from your network though the CMM
NET MGT port.
1. From your network, type the following command:
$ ssh root@CMM_IP_address
Password: changeme
The default password is changeme. At this point, you are logged into Oracle ILOM on the CMM. You can
type a variety of Oracle ILOM commands to administer the modular system and modular components.
5