Table of Contents
Advertisement
Features and Menus
Announc. prot.
(
) announcement protection. When announcement protection is activated, no
Off
announcements can be made to your telephone (see also page 61).
When there are multiple trunk keys configured on your telephone, you can switch
announcement protection for each of these keys on/off. To do so, select the
desired key (e. g.
L1: [internal call number]
Telephone lock
another person, you can activate the telephone lock. This means your telephone
has the authorisations of the "Guests" user group. This user group is configured by
the system administrator and locks various menu entries and list accesses on your
device so that unauthorised persons cannot read or change them. Dialling author-
isation can also be restricted. Please contact your system administrator for infor-
mation on the altered range of features when the telephone lock is activated.
Access to the telephone lock is protected by your user PIN (default "0000"). After
entering the PIN, you activate / deactivate the function with the
: Enter the destination call number and activate or deactivate the baby
Baby call
call (see also the chapter entitled Baby Call starting on page 59).
: Enter your current PIN and then the new PIN twice. If you have for-
Change PIN
gotten your PIN, contact your system administrator.
: All active features that hinder your availability (call protection,
Availability
call-waiting protection, call forwarding) are cleared.
Call wait. Prot
by the call-waiting tone; the caller hears the busy tone. When there are multiple
trunk keys configured on your telephone, you can activate/deactivate call waiting
protection for each of these keys. Select the desired key (e. g.
) and then press the Ok softkey. Activate this function with
call number]
82
Note: Call protection is only activated on the terminal on
which it was set. Even if your internal call number of the ter-
minal is available (that is, also on other terminals) more than
once, call protection is not automatically activated there.
(Announcement protection): Switching on (
: If you wish to temporarily forward usage of your telephone to
: During a telephone conversation, no further calls are signalled
Note: Call-waiting protection is only activated on the termi-
nal on which it was set. Even if your internal call number of
the terminal is available (that is, also on other terminals)
more than once, Call-waiting protection is not automatically
activated there.
) or switching off
On
) and then press the Ok softkey.
or
On
L1: [internal
The Menus
option.
Off
.
on
Advertisement
Table of Contents
