Mercury 15 EFI SeaPro Installation, Operation & Maintenance Manual page 103

• One anode is located on the bottom of the lower engine mount. A screw
secures it and two continuity wires to the mount.
d
c
b
a
a - Anode
b - Screw
c - Continuity wire (from swivel bracket to lower mount)
d - Lubrication fitting
e - Continuity wire (from lower mount to driveshaft housing)
• Two anodes are located near the bottom of the transom brackets. The
anodes are secured to the brackets with screws.
When installing an anode, be certain to tighten the fasteners to the specified
torque.
eng
MAINTENANCE
93
e
62942
62959