c. Make a center mark (c), midway between marks (a and b). Align the
end guide with this center mark when installing the cable onto the
engine.
3. Attach the throttle cable end guide to the throttle lever with a washer and
bow‑tie retainer.
4. Adjust the cable barrel so the installed throttle cable will maintain
alignment.
5. Position the throttle cable into the barrel receptacle.
a -
Bow‑tie retainer
b -
Flat washer
c -
Throttle cable
d -
Cable barrel
eng
ENGINE INSTALLATION
a
c
c
a
b
b
d
63129
119
6098