Table of Contents
Advertisement
INSTALLING OUTBOARD ON TRANSOM
Failure to correctly fasten the outboard could result in the outboard propelling
off the boat transom resulting in property damage, serious injury, or death.
Before operation, the outboard must be correctly installed with the required
mounting hardware.
This product must be secured to the transom with the required mounting
hardware. If the outboard strikes an underwater object, the required mounting
hardware prevents the outboard from propelling off the transom. A decal on the
swivel bracket reminds the installer of the potential hazard.
1. Place the outboard on the centerline of the transom.
2. Tighten the transom bracket clamp screws to the specified torque.
Description
Transom bracket clamp screws
eng
ENGINE INSTALLATION
!
WARNING
Avoid serious injury
or death. Secure
engine to transom
with bolts.
WARNING
37-896853-007
52375
27005
28501
Nm
13.5
111
lb‑in.
lb‑ft
120
–
- Quick Links:
- Engine Break‑In Procedure
Hide quick links:
Advertisement
Table of Contents
