Mercury 15 EFI SeaPro Installation, Operation & Maintenance Manual page 45

FEATURES AND CONTROLS
d. Lift the clamp with your fingers and rotate the tiller handle to the
desired angle.
b
a
e. Tighten the clamp screw nut to the specified torque and install the
rubber boot.
Description
Clamp screw nut
f. Tighten the 6 mm Allen socket head pivot screw to the specified
torque.
Description
6 mm Allen socket head pivot
screw
• Lanyard stop switch ‑ Refer to General Information ‑ Lanyard Stop
Switch.
eng
a -
b -
c -
c
63260
Nm
50
Nm
24
35
Clamp
Clamp screw nut
Center demarcation
lb‑in. lb‑ft
– 36.8
lb‑in. lb‑ft
– 17.7