8. Rotate the throttle grip so the idle alignment mark is to the left of the idle
alignment mark on the tiller handle.
a
9. Push on the top cable threaded end while observing the tiller handle idle
alignment marks. When the marks are aligned, thread the nut that is on
the right side up to the bracket. Thread the nut on the left side up to the
bracket finger‑tight.
Push on top cable threaded end
a -
Thread nut up to the bracket
b -
Tiller handle idle alignment marks
ENGINE INSTALLATION
b
a
124
a -
Idle mark on the tiller
handle
b -
Throttle grip idle
alignment mark
64617
b
64618
eng