Return Path Spectrum - ADInstruments DTVLINK-T2 Operation Manual

DTVLINK-T2 Operation Manual

3.11 Return Path Spectrum

Press to return to main menu interface and
press or to select the R-PATH icon, and
then press to enter R-PATH function, as Figure
3-11-1.
Figure3-11-1
In the interface of the R-PATH function, the default
parameter set is Start frequency: 5MHz, Stop
frequency: 45MHz, Reference: 40dBuV, Scale: 5dB/div,
Demodulation mode: peak mode.
In this function ， to view the detailed soft key
instruction, please refer to 3.6.1 and 3.6.2.
Note: In Return Path Spectrum function, you can only
setup the range of return path frequency by
5MHz~45MHz and 5MHz~65MHz.
61