Charging - ADInstruments DTVLINK-T2 Operation Manual

5.2 Charging

Please charge the instrument as following charging
process:
1. Insert the charger output plug to DTVLINK-T2' DC
charge socket.
2. Connect the charger to AC 100V-240V Power and
the charger indicator will light with red.
3. When indicator become to green, the instrument
has been fully charged(It is suggested to charge
another one hour after indicator change to green.
This way can extend the battery life). Then you can
disconnect the charger input plug with power and
pull out the charger output plug.
NOTE:
The instrument can not be charged in the temperature
beyond 10℃~35℃, otherwise the battery life will be
shorten.
96
DTVLINK-T2 Operation Manual