ADInstruments DTVLINK-T2 Operation Manual page 50

DTVLINK-T2 Operation Manual
REF(REFERENCE LEVEL): After selecting the REF
parameter, show as figure 3-6-3, press or
to adjust the reference level.
Note: The character/digit keys input is not support in
REF term.
TRC: After selecting the TRC parameter, press or
to select the sampling mode (AVG or PEAK),
AVG: sample average mode, the display result of each
point will be an average of several sample value. It will
be faster than the PEAK mode, and also if you want to
measure the noise of the system, you need to select
this mode.
PEAK: positive-peak mode, the display result of each
point will be peak value of several sample value. It will
be necessary to select this mode to measure the video
or audio level of analogue channels. Show as figure
3-6-4.
42