Table of Contents
Advertisement
Maintenance
Make sure fixture is cool and disconnected from power mains before any service.
Weekly operating hours and environmental conditions will establish how often the fixtures need
cleaning. Fixtures should be cleaned and inspected at least once a month to maintain optimum
performance.
Accumulation of dust and fog residue increases heat build up, can lead to
malfunctions, overheating and reduction in maximum light output, reduced fixture life and over
all performance. Before conducting any maintenance, disconnect fixture from power mains.
1) Disconnect fixture from power mains.
2) Use a vacuum with a soft brush to remove dust collected on external vents and internal
components. If using an air compressor, use low pressures and extreme care to prevent
damaging any internal parts or effects.
4) Clean all optical elements when the fixture is cold. Use a soft lint free cotton cloth or tissue
and cleaner safe for plastics.
5) Inspect clamps and safety cables to ensure fixture is secure and safe.
Accessory Items
Order Code
CLAMP-MEGA/B
CLAMP-CBHALF
SAFETYCABLE18B
SAFETYCABLE18S
DL-LEDPAR1C36OL30
DL-LEDPAR1C36OL45
DL-LEDPAR1C36OL60
CA-XLR3/5
CA-XLR3/10
CA-XLR3/25
CA-XLR3/50
CA-XLR3/100
CO-XLR3M
CO-XLR3F
CO-XLRTERM3
CO-XLR3MTO5F
CO-XLR5MTO3F
(sold separately)
Description
Mega Heavy Duty Aluminum Clamp – Black
Half Cheeseborough Coupler 300kg Max Load
Safety Cable Black 18"
Safety Cable Silver 18"
30 degree lens set
40 degree lens set
60 degree lens set
Pre-made 5' 3-pin XLR Cable
Pre-made 10' 3-pin XLR Cable
Pre-made 25' 3-pin XLR Cable
Pre-made 50' 3-pin XLR Cable
Pre-made 100' 3-pin XLR Cable
XLR Connector 3-pin Male
XLR Connector 3-pin Female
XLR 3 Pin Data Terminator
XLR 3 Pin Male to 5 Pin Female Adapter
XLR 5 Pin Male to 3 Pin Female Adapter
13
Advertisement
Table of Contents
