Maintenance - AEMC 500 User Manual

5.1 Warning!
• Remove the test leads on any input before opening the case.
• Do not operate the clamp-on probe without a battery case cover.
• To avoid electrical shock, do not attempt to perform any servicing
unless you are qualified to do so.
• To avoid electrical shock and/or damage to the instrument, do not
get water or other foreign agents into the probe.
5.2 Cleaning
• To clean the probe, wipe the case with a damp cloth and mild deter-
gent.
• Do not use abrasives or solvents.
• Do not get water inside the case. This may lead to electrical shock
or damage to the instrument.
12
Shop for AEMC products online at:
CHAPTER 5

MAINTENANCE

ShopAEMC
www.
Clamp-on Meter Model 500
.com 1.888.610.7664