Battery Replacement - AEMC 500 User Manual

Clamp-on meter

Hide thumbs Also See for 500:

Table of Contents

5.3

Battery Replacement

The clamp-on meter Model 500 is powered by two AA 1.5V batter-

ies. The

symbol will appear on the LCD display when the supply

voltage drops below proper operating range. This indicates that the

batteries need to be changed. It is recommended to replace both bat-

teries at the same time.

• The meter must be in the OFF position and disconnected from

any circuit or input.

• Place the meter face down and loosen the battery cover screw

with a flat head screwdriver.

• Replace the old batteries with two fresh 1.5V AAA size batteries.

• Replace the battery compartment cover and tighten down the

screw.

Clamp-on Meter Model 500

Shop for AEMC products online at:

ShopAEMC

www.

.com

1.888.610.7664

Table of Contents