Operation - AEMC 500 User Manual

4.1 AC Current Measurement
• Turn the rotary range switch to the
• Press the lever to open the jaws.
• Clamp the jaws around the conductor to be measured.
• Immediately unclamp the meter from the conductor under test if
overload " " is displayed.
• If reading is unstable and is hard to read, push the HOLD button
and read the measurement.
WARNING: Remove test leads before measuring current.
OK
8
Shop for AEMC products online at:
CHAPTER 4

OPERATION

range.
NO
(two conductors
from different
phases)
ShopAEMC
www.
MODEL 500
®
CL AMP METER
I N S T R U M E N T S
600V CAT II
400A
300V CAT III
H HOLD
W
V
A
OFF
COM
!
CAT II
600V
Clamp-on Meter Model 500
.com 1.888.610.7664