Billion BiPAC 7404VOX User Manual page 46

Note: Wireless performance may degrade if select ID channel is already being occupied by
other AP(s).
TX PowerLevel: It is a function that enhances the wireless transmitting signal strength. User
may adjust this power level from minimum 1 up to maximum 127.
Note: The Power Level maybe different in each access network user premises environment
and choose the most suitable level for your network.
Connected: Representing in true or false. That it is the connection status between the system
and the build-in wireless card.
AP MAC Address:
AP Firmware Version:
Wireless Distribution System (WDS)
It is a wireless access point mode that enables wireless link and communication with other access
point. It is
advantages of cost saving and flexibility which
between two access points and extending an existing wired or wireless infrastructure network to
create a larger network. It can connect up to 4 wireless APs for extending cover range at the same
time.
In addition,
the same for both access points.
WDS Service: The default setting is Disabled. Check Enable radio button to activate this
function.
1. Peer WDS MAC Address:
each other.
2. Peer WDS MAC Address:
3. Peer WDS MAC Address:
4. Peer WDS MAC Address:
Note: For MAC Address, Semicolon ( : ) must be included.
41
connected
bridge
be