ABB REM 610 Technical Reference Manual page 114

REM 610 REM 610
114
Motor Protection Relay
Technical Reference Manual - ANSI Version
Terminal
REM610x11xxxx REM610x15xxx-
X2.1-9
X2.1-10
X2.1-11
X2.1-12
a)
The value denotes the rated current for each input.
Table 5.2.1.-2 Auxiliary supply voltage
Terminal Function
X4.1-1 Input, +
X4.1-2 Input, -
Table 5.2.1.-3 IRF contact
Terminal Function
X4.1-3 IRF, common
X4.1-4 Closed; IRF, or U
X4.1-5 Closed; no IRF, and U
Table 5.2.1.-4 Output contacts
Terminal Function
X4.1-6 SO2, common
X4.1-7 SO2, NC
X4.1-8 SO2, NO
X4.1-9 SO1, common
X4.1-10 SO1, NC
X4.1-11 SO1, NO
X4.1-12 PO3 (restart disable), NC
X4.1-13
X4.1-14 PO2, NO
X4.1-15
X4.1-16 PO1, NO
X4.1-17
X4.1-18 PO1 (TCS), NO
X4.1-19
X4.1-20 -
a)
This output is intended to be used with contactor controlled motors.
b)
If the restart disable signal has not been routed to PO3 (SGF1/7=1), PO3 will be NO.
Function
x
- -
- -
- -
- -
disconnected
aux
connected
aux
a)
a)
a)
b)
1MRS755537
REM610x51xxxx REM610x55xx-
xx
-
-
-
-
-
-
-
-