Overview; Rack Identification Legend; Installing The Rail Kit Into A Rack - AudioCodes Mediant 9000 SBC Hardware Installation Manual

3.2

Overview

This rack hardware kit supports a variety of products in round-, square-, or threaded-hole
racks. Use the legend to identify installation steps appropriate to the type of rack.
Note: If you are shipping the server installed in a rack, see the additional instructions
located in "Preparing the product for integrated shipping in a rack" before proceeding.
3.3

Rack Identification Legend

Round-hole racks
No tools required
3.4

Installing the Rail Kit into a Rack

Warning: To avoid risk of personal injury or damage to the equipment, do not stack
anything on top of rail-mounted equipment or use it as a work surface when extended
from the rack.
Caution: Always plan the rack installation so that the heaviest item is on the bottom of
the rack. Install the heaviest item first, and continue to populate the rack from the bottom
to the top.
Hardware Installation Manual
Square-hole racks
No tools required
16
Mediant 9000 SBC
Threaded-hole racks
-
Document #: LTRT-41659