Deployment Of Two Devices For High Availability; Figure 5-5: Cabling For High Availability (Example) - AudioCodes Mediant 4000 SBC Hardware Installation Manual

Audiocodes family of mediant session border controllers (sbc)

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

Hardware Installation Manual

5.2.3

Deployment of Two Devices for High Availability

The device supports 1+1 high availability, whereby two devices are deployed and connected

to the same broadcast domain/s. In such a setup, the same Ethernet port-pair redundancy

setup is done for each device. For example, if port-pair 5 and 6 are used for Device "A", then

Device "B" must also use port-pair 5 and 6, as shown in the figure below:

In High Availability, the two devices interconnect through their Maintenance interfaces, using

the same Ethernet Port Group.

Note:

For possible connections (including Tx / Rx settings) between the HA devices, refer

to the User's Manual.

Session Border Controllers

5. Cabling the Device

Mediant 4000 SBC

Table of Contents