Step 4: How To Configure Time Settings - Cisco SCE 2000 Installation And Configuration Manual

Initial System Configuration
The default password for all levels is "cisco".
Note
The default User password is displayed.
Step 1
•
•
The default Admin password is displayed.
Step 2
•
•
Step 3 The default Root password is displayed.
•
•
Step 4 Configure password encryption. By default, password encryption is not enabled.
•
•
EXAMPLE:
Following is an example of changing all passwords. Password encryption is not enabled (default).
Enter a User password [cisco]: userin
Enter an Admin password [cisco]: mng123
Enter a Root password [cisco]: cistech
Enable passwords encryption? [no]:

Step 4: How to Configure Time Settings

The time settings menu configures all time and date related parameters in the system. The time settings
menu includes the following:
•
•
•
•
You must enter the time setting menu in order to configure SNTP settings. You may choose to skip the
time settings menu if you wish to accept all default values.
Note Unlike all other settings defined in the system configuration, setting the time is done immediately and
Enter the time settings menu.
Would you like to enter the Time settings menu? [no]: y
Type y and press Enter.
The time settings dialog begins.
Cisco SCE 2000 4xGBE Installation and Configuration Guide
5-8
Chapter 5
To accept the displayed value, press Enter.
To change the value, type any desired character string and press Enter.
To accept the displayed value, press Enter.
To change the value, type any desired character string and press Enter.
To accept the displayed value, press Enter.
To change the value, type any desired character string and press Enter.
To disable password encryption, press Enter.
To enable password encryption, type y and press Enter.
Time zone
Local time
Date
SNTP menu
Connecting the Management Interfaces and Performing Initial System Configuration
OL-7824-07