How To Mount The System To The Rack - Cisco SCE 2000 Installation And Configuration Manual

Installing the SCE 2000 Platform

How to Mount the System to the Rack

When the appropriate mounting brackets are securely installed, the SCE 2000 can be installed into the
rack.
Step 1 Make sure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the brakes are
engaged or that the rack is otherwise stabilized.
Step 2 Position the SCE 2000 so that the front end is closest to you, and lift it carefully to place it into the rack.
To prevent injury, avoid sudden twists or moves.
Slide the SCE 2000 into the rack, pushing it back until the brackets (installed at the front of the SCE
Step 3
2000) meet the mounting strips or posts on both sides of the rack.
A rack with both front and back posts will have the crossrail supports installed. Slide the SCE 2000 onto
these crossrails and push it all the way back
Figure 4-9
While keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with
Step 4
the holes on the rack or mounting strip
Cisco SCE 2000 4xGBE Installation and Configuration Guide
4-10
Sliding the SCE Platform into the Rack
PWR A PWR B STATUS
MNG 1 BYPASS Cisco SCE
MNG 2 CONSOLE LINK RX 2000 Series
LINK/ ACTIVE 10/100/ 1000 LINK/ ACTIVE 10/100/ AUX TX LINK RX 4xGBE
1000 TX LINK RX TX
RX LINK RX TX
MM TX RX MM
TX RX MM
GBE-1 TX RX MM TX
SUB LINE
NET GBE-2
SUB LINE/CASCADE NET
PWR A
PWR B
STA TUS
BYP ASS
C is co SC
MN G 1
MN G 2
CON SOL
E LINK RX
LINK / AUX
10/1 00/ TX
ACT IVE LINK /
1000 10/1 00/ LINK RX
ACT IVE
1000 TX
LINK RX
TX
RX
MM
TX
RX
MM
TX
RX
MM
TX
GBE -1
SUB
LINE
NET
GBE -2
SUB LINE
/CA SCA DE
1
(Figure 4-9).
E 20 00
Se rie s
4x G BE
LINK RX
TX
RX
MM
TX
NET
2 3
(Figure 4-10).
Chapter 4 Installation and Maintenance
OL-7824-07