Show System Operational Status; Show Interface Linecard Connection-Mode - Cisco SCE 2000 Installation And Configuration Manual

Basic Post-Installation Checklist
Logger status: Enabled
Platform: SCE2000 - 4xGBE
Management agent interface version: SCE Agent 3.5.5 Build 121
Software package file:
ftp://ftpserver/D:\pcube\Os\3.5.5\252\csi-filer02b/projects/srg-sce-swinfra/emb/builds/3.5
.5/252/SE1000/SE1000_03550252_K9.pkg
SCE2000
show interface
Run this command for each interface. The command syntax is:
show interface GigabitEthernet 0/port-number
sce>show interface GigabitEthernet 0/3
Auto negotiation configured: Disabled
Actual status:
Bandwidth (L1): 1000000 Kbps, Burst-size: 50000 bytes
Pseudo IP Address: Not Configured
physical mode : 0

show system operational status

sce>show system operation-status
System Operation status is Operational
show interface linecard
sce>show interface LineCard 0
The application assigned to slot 0 is /apps/data/scos/app/en35156.sli
Silent is off
Configured shutdown is off
Shutdown due to sm-connection-failure is off
Resulting current shutdown state is off
WAP handling is disabled

show interface linecard connection-mode

sce>show interface linecard 0 connection-mode
slot 0 connection mode
Connection mode is inline
slot failure mode is external-bypass
Redundancy status is standalone
Cisco SCE 2000 4xGBE Installation and Configuration Guide
B-4
uptime is 2 weeks, 3 hours, 57 minutes, 48 seconds
Link is: ON
Auto negotiation: Disabled
Appendix B CLI Commands to Verify a Successful Installation
OL-7824-07