Mount The System To The Rack; Summary Steps; Detailed Steps - Cisco SCE 1000 Quick Start Manual

Mount the System to the Rack

When the appropriate mounting brackets are securely installed, the SCE 1000 can be installed into the rack.

Summary Steps

1. Make sure that the rack brakes are locked or that the rack is otherwise stabilized.
2. Position the SCE 1000 so that the front end is closest to you, and lift it carefully to place it into the rack. To prevent injury,
avoid sudden twists or moves.
3. Slide the SCE 1000 into the rack, pushing it back until the brackets (installed at the front of the SCE 1000) meet the
mounting strips or posts on both sides of the rack.
4. While keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the holes on the
rack or mounting strip.
5. For each bracket, insert and tighten two appropriate screws to the rack.

Detailed Steps

Step 1 Make sure that the rack brakes are locked or that the rack is otherwise stabilized.
Figure 8 Sliding the SCE Platform into the Rack
PWR A PWR B STATUS
MNG 1 BYPASS Cisco SCE
MNG 2 CONSOLE 2000
LINK/ ACTIVE 10/100/ 1000 LINK/ AUX LINK RX TX 4xGBE Series
ACTIVE 10/100/ 1000 LINK RX TX LINK RX
TX LINK RX
RX MM TX TX
RX MM TX
RX MM TX RX
GBE-1 MM TX
SUB LINE NET
SUB LINE/CASCADE GBE-2
NET
PW R A
PW R B
STA TUS
BYP ASS
MN G 1
MN G 2
CO NSO LE
AU X
LINK / 10/1 00/
ACT IVE
LINK /
1000 10/1 00/
ACT IVE
1000
1
Position the SCE 1000 so that the front end is closest to you, and lift it carefully to place it into the rack. To prevent
Step 2
injury, avoid sudden twists or moves.
Slide the SCE 1000 into the rack, pushing it back until the brackets (installed at the front of the SCE 1000) meet the
Step 3
mounting strips or posts on both sides of the rack.
A rack with both front and back posts will have the crossrail supports installed. Slide the SCE 1000 onto these crossrails
and push it all the way back.
C is co S
C E 10 00
Se rie s
LINK RX 2x G B E
TX
LINK RX
TX
RX
MM
TX
RX
MM
TX
GBE -1
SUB
LINE
NET
2 3
7