DIP Switch
The Industrial PoE+ Switch has a built-in solid DIP switch that provides
"Standard" and "Extend" operation modes. The Industrial PoE+ Switch operates
as a normal IEEE 802.af/at PoE+ Switch in the "Standard" operation mode.
In the "Extend" operation mode, the Industrial PoE+ Switch operates on a per-
port basis at 10Mbps full duplex operation but can support 30-watt PoE power
output over a distance of up to 250 meters overcoming the 100m limit on Ethernet
UTP cable. With this brand-new feature, the Industrial PoE+ Switch provides an
additional solution for 802.3af/at PoE+ distance extension.
Extended
Standard
P1
P2 FAULT
Extended
Standard
P1
P2 FAULT
6
Default PoE Mode
PoE
100 meters (328 feet)
Extended PoE Mode
PoE
250
meters (820 feet)
PoE IP
Camera
100BASE-TX UTP with PoE
PoE
PoE IP
Camera