Table of Contents
Advertisement
2.2 Switch Front Panel
The front panel of the Industrial PoE+ Switch consists of 8 10/100/BASE-TX ports
featuring 30-watt 802.3at PoE+, and 2 additional Gigabit copper/SFP combo
interfaces for Gigabit Ethernet extension and video uplink. The LED indicators are
also located on the front panel of the Industrial PoE+ Switch.
Figure 2-1 shows the front panel of Industrial PoE+ Switch.
Fast Ethernet TP interfaces (Port 1 to port 8)
10/100BASE-TX copper, RJ45 twisted-pair: Up to 100 meters.
Gigabit TP Interfaces (Port 9 to port 10 TP/SFP Combo Interfaces)
10/100/1000BASE-T copper, RJ45 twisted-pair: Up to 100 meters.
Gigabit SFP Slots (Port 9 to port 10 TP/SFP Combo Interfaces)
1000BASE-SX/LX mini-GBIC slot, SFP (Small Factor Pluggable) transceiver
module: From 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilo-
meters (single-mode fiber).
Extended
Standard
P1
P2 FAULT
9
10
9
10
7
8
5
6
3
4
1
2
802.3at PoE+
IFGS-1022HPT
Figure 2-1: IFGS-1022HPT Front Panel
LNK
ACT
1000
LNK
ACT
PoE In-Use
5
Advertisement
Table of Contents
