Chipset Menu; North Bridge Configuration; South Bridge Configuration - Aaeon EMB-BT1 User Manual

3.4

Chipset menu

The Chipset menu items allow you to change configuration options for the North
Bridge and South Bridge.
3.4.1

North Bridge Configuration

Primary IGFX Boot Display [VBIOS Default]
Select the Vedio Device which will be activated during POST. Your selection
does not take effect if you have installed an external graphics device. Secondary
boot display selection will appear based on your selection. VGA modes can be
supported only on the primary display. Configuration options: [VBIOS Default]
[CRT] [HDMI] [LVDS]
LVDS [Enabled]
Allows you to enable or disable LVDS (CH7511). Configuration options: [Disabled]
[Enabled]
LVDS Panel Type [1024x768 18bit, 60Hz]
Allows you to configure LVDs panel used by Internal Graphics Device.
Configuration options: [640x480, 18bit, 60Hz] [800x480, 18bit, 60Hz] [800x600,
18bit, 60Hz] [1024x600, 18bit, 60Hz] [1024x768, 18bit, 60Hz] [1024x768, 24bit,
60Hz] [1280x768, 24bit, 60Hz] [1280x1024, 48bit, 60Hz] [1366x768, 24bit, 60Hz]
[1440x900, 48bit, 60Hz] [1600x1200, 48bit, 60Hz] [1920x1080, 48bit, 60Hz]
[1920x1200, 48bit, 60Hz]
LVDS Backlight Level [70%]
Allows you to select the backlight brightness of LVDS. Configuration options: [0%]
~ [80%] [90%] [100%]
Backlight Invert [Normal]
Allows you to select the backlight control type of LVDS. Configuration options:
[Normal] [Inverted]
3.4.2

South Bridge Configuration

USB 2.0 (EHCI) Support [Enabled]
Allows you to enable or disable USB2.0 (EHCI) support. Configuration options:
[Disabled] [Enabled]
USB Express Port 0~3 [Enabled]
Configuration options: [Disabled] [Enabled]
Speed [Gen2]
Configuration options: [Auto] [Gen 1] [Gen 2]
3-8
EMB-BT1