Table of Contents
Advertisement
3.3
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other
system devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect
field values can cause the system to malfunction.
3.3.1
Power Management
Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Typ]
ERP Function [Disabled]
Enables or disables ERP power saving function. Configuration options: [Enabled]
[Disabled]
Restore AC Power Loss [Last State]
[Power On]
[Power Off]
[Last State]
ACPI Settings
ACPI Sleep State [S3 (Suspend to RAM)]
Select the highest ACPI sleep state the system will enter when the Suspend button
is pressed. Configuration options: [Suspend Disabled] [S3 (Suspend to RAM)]
Wake Configuration
Resume on PCIE/XHCI [Disabled]
Enables or disables resume from PCIE/XHCI signal: [Disabled] [Enabeld]
Wake system from S5 [Disabled]
[Disabled]
[Fixed Time]
[Dynamic Time]
The following items appear when Wake System with Fixed Time is enabled.
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.
Chapter 3: BIOS setup
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the
system state was before the AC power loss.
Disables system wake up from S5.
The system will wake up at the specified hr::min::sec.
Configuration options: [Disabled] [Enabled] .
The system will wake up at the current time plus a specified
number of minutes.
3-3
Advertisement
Table of Contents
