Table of Contents
Advertisement
Change Settings [Auto]
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Auto] [IO=378h; IRQ=5;] [IO=378h; IRQ=5~12;] [IO=278h;
IRQ=5~12;] [IO=3BCh; IRQ=5~12;] [IO=378h;] [IO=278h;] [IO=3BCh;]
Device Mode [STD Printer Mode]
Allows you to select the Printer Port mode. Configuration options: [STD
Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP
Mode]
3.3.4
Dynamic Digital IO
The items in this menu allow you to modify Digital IO settings.
GPIO1~3 Direction [Input]
Set GPIO data flow as Input or Output. Configuration options: [Input] [Output]
GPIO4~7 Direction [Output]
Set GPIO data flow as Input or Output. Configuration options: [Input] [Output]
Output Level [Hi]
Configuration options: [Hi][Low]
3.3.5
Trusting Computing
The items in this menu allow you to modify trusted computing settings.
Security Device Support [Disabled]
Enables or disables BIOS support for security device, which will not be displayed in
the operating system. TCG EFI protocol and INT1A interface will not be available.
Configuration options: [Disabled] [Enabled]
3.3.6
USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
Chapter 3: BIOS setup
Enables the support for USB devices on legacy operating
systems (OS).
USB devices are only available when running BIOS Setup.
3-5
Advertisement
Table of Contents
