Table of Contents
Advertisement
The following items appear when Wake System with Dynamic Time is
enabled.
Wake up minute increase [1]
Specify the number of minutes added to the current time before waking up
system.
3.3.2
CPU Configuration
The items in this menu show CPU-related information.
Socket 0 CPU Information
Displays additional CPU information.
Intel Virtualization Technology [Disabled]
[Enabled]
[Disabled]
3.3.3
Super IO Configuration
Serial Port1~6 Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options:
[Enabled] [Disabled]
Device Mode [RS232]
Allows you to select COM RS Mode. Configuration options: [RS232] [RS422]
[RS485]
Change Settings [Auto]
Allows you to select the Serial Port base address. Configuration options:
[Auto] [IO=3F8h; IRQ=4] [IO=3F8h; IRQ=3~12;] [IO=2F8h; IRQ=3~12;]
[IO=3E8h; IRQ=3~12;] [IO=2E8h; IRQ=3~12;]
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port configuration.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT/LPTE). Configuration
options: [Enabled] [Disabled]
3-4
Allows a hardware platform to run multiple operating systems
separately and simultaneously, enabling one system to
virtually function as several systems.
Disables this function.
EMB-BT1
Advertisement
Table of Contents
