Elcometer 207 Operating Instruction page 23

6.3 DIFFERENTIAL MODE
Your gauge includes Differential Mode which allows it to display the positive or negative difference from
an entered nominal value.
To switch differential mode on/off and enter the value:
Elcometer 207
1. Switch on the gauge.
2. Press the DIFF key.
The gauge will display DIFF OFF or DIFF
followed by a thickness value and flashing MM
(or IN), depending on which mode the gauge is
in.
3. Repeat step 2 to toggle differential mode on or
off.
4. Assuming DIFF
displayed, use the UP and DOWN arrow keys
to scroll to the desired nominal thickness
value.
5. Press the SEND key to select the nominal
value entered.
value flashing MM
Elcometer 207DL
1. Switch on the gauge.
2. Press MODE key.
3. Press UP and DOWN arrow keys to scroll to dIFF
symbol.
The gauge will display DIFF OFF or DIFF
followed by a thickness value and flashing MM (or
IN), depending on which mode the gauge is in.
4. Press SEND key to switch differential mode on or
is off.
5. Assuming DIFF value flashing MM is displayed,
use the UP and DOWN arrow keys to scroll to the
desired nominal thickness value.
6. Press SEND key to select the desired nominal
value and return to mode menu.
7. Press MODE key when finished.
21