Figure 3.16Smart Settings - Advantech SOM-5892 Manual


Device reset time-out
Set USB mass storage device Start Unit command time-out value.

Device power-up delay
Set the maximum time of the device will take before it properly reports itself to
the Host Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a
Hub port the delay is taken from Hub descriptor.
3.2.2.12 SMART Settings

SMART Self Test
This item allows users to enable or disable HDDs SMART Self Test during
POST.
Figure 3.16 SMART Settings
31 SOM-5892 User Manual