Table of Contents
Advertisement
• This unit operates at DC 12V/ AC 24V/ PoE.
• Installation and service should be performed only by qualified and experienced technicians
and comply with all local codes and rules to maintain your warranty.
• To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.
• Wipe the camera with a dry soft cloth. For tough stains, slightly apply with diluted neutral
detergent and wipe with a dry soft cloth.
• Do not apply benzene or thinner to the camera, which may cause the surface of the unit to
be melted or lens to be fogged.
• ITE is to be connected only to PoE networks without routing to the outside plant.
• The power supply shall be approved for ITE NEC Class 2 or LPS with a rating of 24VAC,
550mA minimum and 50 degrees Celsius
• Video Out connection should be intra-building only.
• Avoid aligning the lens to very bright objects, for example, light fixtures for long periods of
time.
• Avoid operating and storing the unit in the following locations:
• Extremely humid, dusty, hot, or cold environments. The recommended operating
temperature range is -20˚C to 50˚C (-4˚F to 122˚F).
• Close to sources of powerful radio or TV transmitters.
• Close to fluorescent lamps or objects with reflections.
• Under unstable or flickering light sources.
Warning
WEEE (Waste Electrical and Electronic Equipment). Correct disposal
of this product (applicable in the European Union and other European
countries with separate collection systems). This product should be
disposed of, at the end of its useful life, as per applicable local laws,
regulations, and procedures.
Advertisement
Table of Contents
